PENGONTROLAN KETINGGIAN AIR PADA BAK PENAMPUNG BERBASIS NODE MCU

Main Article Content

Indrianto Indrianto Ferry Sudarto Siti Juhriah Novianty

Abstract

This research will discuss a system designed to control water use savings. Because water is one of the natural resources of the non-biological. At this point nearly everyone save or hold water in the sump. But, sometimes the water is sure to be closed or turned off so that the water will be wasted over the limit sump. The existence of thisprototype is no more water is wasted down the drain sump over the limit. As for the circuit system used on the prototype consists of a Water Level Sensor as the water sensor, microcontroller (MCU) as Node, Relay switching as that can control the activeand non-active system running, and Solenoid Valve as a valve that cuts or close the stream when the water height is sufficient. So this system aims to control the height of the water in the sump automatically and control the use of water become more efficient

Downloads

Download data is not yet available.

Article Details

How to Cite
[1]
I. Indrianto, F. Sudarto, and S. Novianty, “PENGONTROLAN KETINGGIAN AIR PADA BAK PENAMPUNG BERBASIS NODE MCU”, CCIT (Creative Communication and Innovative Technology) Journal, vol. 11, no. 2, pp. 217-224, Aug. 2018.
Section
Articles

References

1. Hutahaean, Jeperson. “Konsep Sistem Informasi”.Deepublish, Yogyakarta, Indonesia. 2015
2. Djahir, DRA HJ.Yulia. “Bahan Ajar Sistem Informasi Manajemen". Deepublish, Yogyakarta, Indonesia. 2015.
3. Irwansyah, Edy. "Pengantar Teknologi Informasi, Deepublish, Yogyakarta, Indonesia. 2014.
4. Melalolin, Ivan C. “Rancang Bangun Pengaman Otomatis". Universitas Komputer Indonesia, Bandung, Indonesia. 2013.
5. Effendi, Bachtiar S.T M.Kom. “Dasar Mikrokontroller ATMEGA8535 dengan CAVR”. Deepublish, Yogyakarta, Indonesia. 2014

Most read articles by the same author(s)

1 2 > >>